Intuitive touch screen operation.
Dual independent working stations for large production runs.
Hot runner system eliminates runner and improve productivity.
Separate 7 liter melting tank(s). Multiple melting tank is optional.
LPMS specially designed melt-on-demand tank can melt down the resin swiftly and evenly.
The gear pump is made of hard-wearing material，which is stable，injection volume accuracy ±0.1g，maximum shot size is 5.8g/s.
Injection pressure range 1~50kg, which can be controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely from the PLC.
Fifteen thermal control zones for precise melt control.
Light curtain and dual palm buttons for operator safety.
Ejection system.
Application
LPMS? machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.
Hot runner system eliminates runners and higher output per cycle. It is designed for high volume production.
Specification
Machine Size | 1300 mm x 800 mm x 1740 mm / 520 kg 51.18 in x 31.50 in x 68.50 in / 1146 lbs |
Working Station Height | 840 mm | 33.07 in |
Plant View | 1300 mm x 1700 mm | 51.18 in x 66.93 in |
Packing Size | 1370 mm x 930 mm x 1830 mm / 560 kg 53.94 in x 36.61 in x 72.05 in / 1235 lbs |
Melting Tank | Melt on demand 7 liter x 1 |
Auto Feeding System | Optional |
Gun Model & Tip Angle | Hot Runner System |
Heated Hose | 1.6 m x 2 |
Electricity | 200-240 VAC / 1 Phase / 50 Hz |
Temperature Control Zones | 11 or 15，depends on part design |
Each Station Gun Tip Q’ty | 2 or 4，depends on part design |
Temperature Range | Ambient up to 250°C / 485°F |
Max. Power | 8Kw or 9.5Kw depends on gun tip q’ty |
Min. Air Pressure | 0.5 MPa | 73 Psi |
Air Consumption | 0.18 m3 / min | 6.35 ft3 / min |
Clamping Device | Air Cylinder |
Clamping Force | Max.1.2 Tons |
Clamping Stroke | 150 mm | 5.91 in |
Control System | 7 ”HMI , PLC controlled |
Safety Protection | Light Curtain , emergency stop button |
Standard Mold Set Size | 250 mm x 150 mm x 308 mm / 75 kg 9.84 in x 5.91 in x12.13 in / 165 lbs |
Max. Mold Set Size | 300 mm x 200 mm x 308 mm 11.81 in x 7.87 in x 12.13 in |
Max. Part Size | 60 mm x 50 mm x 18 mm | 2.36 in x1.97 in x 0.71 in |
Dimension
Video
Copyright ? 2015-2018 LPMS International Ltd. All Rights Reserved.
